Build-to-print manufacturing support for overseas industrial OEMs

[email protected]   ·   +86 156 1070 4122

Request a Quote →

Capabilities

Manufacturing capability, at a glance.

Verified process ranges, materials, finishing and inspection support for build-to-print industrial parts.

01 / CNC02 / Casting 03 / Fabrication04 / Finishing 05 / Materials06 / Inspection

01 / CNC Machining

Machining range and process capability.

Representative working limits are shown where verified. Machine quantities are intentionally omitted.

CNC turning and mill-turn machining operation
Five-axis machining center producing a metal component
3 / 4-Axis VMCUp to 1000 × 600 × 600 mmRepresentative X / Y / Z travel
5-Axis Simultaneous600 × 500 × 500 mmMax. workpiece Ø400 × H300 mm · 15,000 rpm · RTCP
Swiss-Type TurningBar up to Ø20 mmStar SB20 / Citizen Cincom A20 class
CNC TurningBar up to Ø42 mmTurret turning center capability
Typical Machining Tolerance±0.01–0.02 mmTighter features reviewed by geometry, material and process
ProcessesMill-Turn · Grinding · ReamingAlso drilling, boring, threading, sawing and custom fixturing
More CNC materials & process detail

Common materials: 5xxx / 6xxx / 7xxx aluminum; 20# / 1020, 45# / 1045 and Q235 steels; 30CrMo / 35CrMo / 42CrMo and SAE 4130 / 4140-type alloy steels; 12L14; stainless 303 / 304 / 316; H59 brass; C93600 bronze; titanium and engineering plastics including POM, PTFE, PEEK, PVDF, UHMW-PE, PC, ABS, PP and PMMA.

Foreign-standard grades are sourced when specified. If an exact grade is not readily available, a comparable local grade may be proposed for customer approval before production; substitutions are not made without approval.

02 / Casting

Iron casting and gravity permanent-mold aluminum casting.

Actual production experience is separated from larger project-specific capability.

Sand mould preparation in a foundry
Foundry production around prepared sand moulds
Cast IronGray Iron + Ductile Iron
Processes
Green Sand · Shell Molding
Molding
Manual · Automatic Line
Typical Grades
HT200 · HT250 · HT300 · HT350 · ASTM A536 65-45-12
Production Experience
Approx. 0.5–25 kg · up to Ø535 mm
Annual Capacity
Approx. 3,000 metric tons
Cast AluminumGravity Permanent Mold
Mold
Steel permanent mold
Primary Alloy
A356.2-T6
Production Experience
Approx. 0.05–10 kg per casting
Larger Parts
Evaluated by drawing
Downstream
CNC machining · heat treatment · finishing · inspection
More casting capability

Manual sand molding supports low-volume and larger project-specific iron castings; automatic molding is used for repeat and higher-volume work. Low-pressure and high-pressure aluminum casting can also be coordinated for suitable projects, while gravity permanent-mold casting is the established core process.

03 / Fabrication & Welding

Large-format sheet metal, stamping and welded assemblies.

Only verified working ranges are shown; theoretical laser thickness limits and unconfirmed press tonnage are omitted.

CNC press-brake bending operation
Laser Cutting3 kW · up to 2000 × 6000 mmLarge-format sheet processing
CNC Turret Punching25 T · 1250 × 5000 mmRepresentative sheet thickness up to 6 mm
Press-Brake BendingWorking length up to 4000 mmRepresentative machine: 100 T × 3200 mm
ShearingUp to 6 × 3200 mmRepresentative hydraulic shear
StampingPress capacity up to 500 TIncluding coil-fed / repeat production routes
WeldingTIG · MIG/MAG · Laser · RoboticCO₂-shielded welding also available
Tooling & fabrication support

Wire EDM · Sinker EDM · Surface Grinding · Tool Maintenance · Grinding / Deburring · Laser Marking · Assembly.

04 / Finishing & Heat Treatment

Surface treatment matched to the drawing.

Common finishes are visible below. Specialist heat-treatment options stay available without making the page unnecessarily long.

AnodizingNatural / Clear · Black · Type II · Type III Hardcoat
Zinc PlatingBlue-White · Yellow / Color · RoHS-compliant options
Powder CoatingCustomer-specified colors and powder systems · AkzoNobel Interpon · TIGER Drylac
PolishingMechanical polishing · Mirror polishing
More finishing & heat-treatment options

Additional finishing: Black Oxide · Wet Painting · Grinding · Drawing-specific masking and appearance requirements.

Heat treatment: Quenching & Tempering · Carburising · Carbonitriding · Gas Nitriding · Plasma / Ion Nitriding · Ferritic Nitrocarburising · Nitriding + Post Oxidation · Vacuum Heat Treatment · Stress Relieving · Cryogenic Treatment.

Verification where required: Hardness · case depth · microhardness profile · metallographic examination · heat-treatment reports.

05 / Supporting Capabilities

Tooling, fixtures and supply coordination.

Custom Fixtures & GaugesWire / Sinker EDMAssemblyPackaging & Export Coordination

06 / Materials

Common material families.

Exact grade, condition and certification remain drawing-specific.

Aluminum5xxx · 6xxx · 7xxx
Stainless303 · 304 · 316
Carbon / Alloy Steel20# · 45# · Q235 · CrMo grades · 12L14
Copper AlloysH59 · C93600 Bronze
Cast MaterialsGray Iron · Ductile Iron · A356.2-T6
Engineering PlasticsPOM · PTFE · PEEK · PVDF · UHMW-PE + more
Expanded material examples

Aluminum: 5052 / 5083 / 6060 / 6061 / 6063 / 6082 / 7075 and drawing-specified grades.

Steel & stainless: 20# / AISI 1020 reference; 45# / AISI 1045 reference; Q235; 30CrMo / 35CrMo / 42CrMo; SAE 4130 / 4140-type grades; 12L14; 303 / 304 / 316 / 316L; plus tool and mold steels when specified.

Other: Brass / bronze, titanium and common machinable engineering plastics. Grade equivalence is never assumed when a customer specification requires an exact standard.

07 / Inspection & Quality Support

Inspection matched to critical drawing features.

Representative equipment and documentation support—without listing every conventional gauge.

X-ray inspection image displayed on the inspection system monitor
Industrial X-ray inspection system used for non-destructive examination
CMM InspectionCoordinate measurement available
Vision MeasurementVMS-3020 · 300 × 200 × 200 mm
Optical MeasurementMicro-Vu Vertex 420 · 300 × 300 × 150 mm
Precision HeightTRIMOS V5
Specialized ChecksConcentricity / runout · Rockwell hardness
X-Ray InspectionNon-destructive internal inspection available
Documentation:Material Certificates · Dimensional Reports · FAI · PPAP / PSW · Process Flow · Control Plan
More inspection & documentation detail

Conventional metrology includes micrometers, bore gauges, three-point bore micrometers, calipers, pin gauges and feature-specific gauges. PPAP documentation is prepared according to customer requirements rather than presented as a blanket fixed level.

Have a drawing ready?

Send the drawing, material, quantity, finish and delivery requirement. We will review the manufacturing route and identify any important assumptions before quoting.

Request a Quote →
Email Drawing →